Full RS-530 Interface Implemented to Simplify Cabling (OMG-USB-485-1) Field Selectable Interface (OMG-USB-485-1) High Speed UART with 128 byte TX FIFO and 384 byte RX; FIFO Supporting Standard PC Data Rates up to 460.8K bps (OMG-USB- 232-1) or 921K bps (OMG-USB-485-1) 1.8 M (6') High Quality USB Cable Included; Includes Driver and Utility. USB PC-cable driver installation guide The Siemens LOGO! USB PC-cable can run under the following operating systems:.Windows 98SE/XP/2000/Vista.Linux 2.6 This guide will tell you how to install this software for:.Windows 98SE/XP/2000/Vista.Linux 2.6 LOGO!Soft Comfort V5.0 and earlier don’t support Mac OS 9 / OS X to use this.
- 1
OMEGA 7.0 Computer Hardware and Software Requirements
OMEGA 7.0 is compatible with:
Driver Para Cable Usb Serial Omega Psi Phi
- Windows® 10 Professional 32 or 64 bit*
- Windows 8 Professional 32 or 64 bit*
NOTE:
- Auto-Carve 3D* and Gerber Braille Interpreter will not run on 64 bit systems, even if upgrading from a previous version of OMEGA. 32 bit OS is required for these
- Windows 8 and 10 no longer support ECP parallel ports. Therefore GERBER EDGE® and GERBER EDGE 2 printers must use a Gerber USB to Parallel Port option (P83301A) that can interface EDGE and EDGE 2 printers to computers with these operating systems.
- The EDGE FX uses an Ethernet port and does not require any additional adapters.
Driver Para Cable Usb Serial Omega-3
Minimum hardware requirements are dictated by the operating system used.
| CPU | Intel Pentium IV™ (a higher-performance processor is recommended) |
| RAM | 2 GB (more recommended) |
| Free Disk Space | 40+ GB (more recommended) |
| Video Display | 1024 X 728 min resolution and support of 16 million colors. Other video hardware as required by your operating system. |
| DVD-ROM drive | Required. Writable DVD is recommended. |
| 3.5' Floppy drive | Optional for use with Legacy options, fonts, etc. |
| USB Ports | 1 required. At least two recommended. |
| Ethernet Ports | 1 required for use with the GERBER EDGE FX. |
| Serial (9-pin) | 1 required for use with Gerber sprocket plotters and /or routers. • Gerber offers a USB to Serial Adapter (P83305A) if a serial port is not available. |
| Parallel Ports Not Supported | GERBER EDGE and GERBER EDGE 2 printers must use a Gerber USB to Parallel Port option (P83301A). |
| Mouse or Pointing Device | Required |
Additional hard disk space, memory and faster processors will improve performance, especially when working in data intensive operations or with large files.
If running an EDGE 1 or EDGE 2 you must use the GSP USB to Parallel cable.
- Windows 8 and 10 do not support the needed EDGE 1 and EDGE 2 parallel port usage. Therefore you cannot communicate with a GERBER EDGE or EDGE 2 printer VIA PARALLEL PORT when using these operating systems. You will need the above GSP USB to Parallel Cable.
| Windows 8 or 10 32 bit | Windows 8 or 10 64 bit* | ||
| Design | |||
| Composer and other design functions. Create and save PLT files. | OK | OK | |
| Rendering | |||
| Omega Plot rendering of SPL files. | OK | OK | |
| Output | |||
| EDGE and EDGE 2 connections via parallel ports | NO EDGE and EDGE 2 printers must use a Gerber USB to Parallel Port option (P83301A). | NO EDGE and EDGE 2 printers must use a Gerber USB to Parallel Port option (P83301A). | |
| EDGE FX (Ethernet only) | OK | OK | |
| Plotters via serial port | OK | OK | |
| Plotters via Gerber USB to Serial Cable | OK | OK | |
| Plotters via Off the shelf USB to Serial Cables | GSP Cable strongly recommended | GSP Cable strongly recommended | |
* Auto-Carve 3D and Gerber Braille Interpreter require a 32 bit operating system
OMEGA Multiple Installation Programs
- If you already have Gerber OMEGA software, you can add additional complete OMEGA stations with the OMEGA Multiple Installation Program (Not available in all countries). See your Authorized Gerber Distributor for details.
Need to find your Serial Number or replace a Key Block?
Here are the latest step by step instructions for installing a USB to serial cable plus identifying and changing your com port number. This works with all Windows operating systems.
The following procedure works with all of our cables including the Allen Bradley 1747-UIC, 1761-CBL-PM02, 1747-CP3, and 2711-NC13
1. To begin, click the start menu and type 'Device Manager' and click the Device Manager link.
2. Without your USB to serial adapter plugged in, your Device Manager should look something like below.
3. Plug your USB to serial cable into your PC's USB port. Chances are the drivers are already installed. Look for it to show up under 'Ports (COM & LPT)'. If it does, then note the COM number at the end of the description and proceed to the software you are using it in. If it doesn't show up under 'Ports (COM & LPT)' then proceed to step 4.
4. If your cable does not show up under 'Ports (COM & LPT)' of the Device Manager then you need to install the drivers. They can be found in the PLC Cable Drivers section of our Drivers, Software, and Manuals page. Download them and extract the zip file to your PC.
5. Navigate to the 'Drivers for manual installation' folder and you will find two folders named CH340 and CP210.
6. Double click on the CH340 folder and you will find an EXE file in it. Right click it and select 'Run as Administrator'. Note that this will not work by double clicking the EXE file.
7. Now navigate to the CP210 folder and then to the CP210x_VCP_Windows folder. You will see two EXE files, one for 32 bit and one for 64 bit. Right click the one that matches the processor of your PC and Right click it and select 'Run as Administrator'. Note that this will not work by double clicking the EXE file.